 当前位置：阅读信息 |
HM-15 USB 适配器 V533 版本发布 | 
|
Version 533
2016-12-07
Notices:
-Add AT+FFE2 command used to add a new Characteristic
-Add AT+TYPE command used to control module security type
Add AT+FFE2<P1> command used to add a new Characteristic.
P1: ? ----- Query
P1: 0 ----- Close FFE2 Characteristic, Default value.
P1: 1 ----- Open FFE2 Characteristic
if AT+FFE20 is setup
Service and Characteristic list as follow:
Service FFE0
Characteristic FFE1 (if AT+RESP0 was setup, Properties is Read, WriteWithoutResponse, Notify)
Characteristic FFE1 (if AT+RESP1 was setup, Properties is Read, Write, Notify)
if AT+FFE21 is setup
Service and Characteristic list as follow:
Service FFE0
Characteristic FFE1 (Properties is Read, Notify)
Characteristic FFE2 (if AT+RESP0 was setup, Properties is WriteWithoutResponse)
Characteristic FFE2 (if AT+RESP1 was setup, Properties is Write)
AT+TYPE<P1> command is used to control module security type
P1: ? ---- Query current value
P1: 0 ---- Doesnt need any security value (default value)
P1: 1 ---- Need a sample security (Display yes or no)
P2: 2 ---- Need a pin code (000000 ~ 999999)
| | 技术支持: webmaster@jnhuamao.cn |
|
