 当前位置：阅读信息 |
HM-10 HM-11 firmware V603 released | 
|
V603
=======================================================================
-Add AT+MPIO<P1> command used to control multi-pios in one AT command
P1: 000 ~ 3FF
000 or 3FF is HEX format, change to binary format is 0000000000 or 1111111111,
left side to right side maped PIO2 ~ PIOB
-Modify AT+CO command, added WriteUuid and NotifyUuid support in one AT command.
AT+CO<P0><P1>[P2][P3]
P0: Device type, 1 Byte length
P1: Device MAC, 12 Bytes length
P2: Device Write Property UUID, 4 Bytes length
P3: Device Notify Property UUID, 4 Bytes length
-Support freestyle
Changed friendly interface, AT Command got more style through UART.
Such as AT command, aT, At, at, AT\r\n, At\r\n, at\r\n, all allowed.
HMSoft
2017.11
V550
=======================================================================
Modify AT+FFE2 command add parameters '2'
AT+FFE2<P1> to query or change if use two UUID.
P1: ? --Query
P1: 0 --Only use one Characteristic.
P1: 1 --Use two Characteristic, Second Characteristic value = first Characteristic value + 1
P1: 2 --Use two Characteristic, Second Characteristic value = first Characteristic value - 1
First Characteristic could use AT+CHAR command to setup.
Modify AT+SHOW command, add parameter '2' and parameter '3'
AT+SHOW<P1> used to query or set if show device name or device RSSI value when execute a discovery proceudre
P1: ? -- Query
P1: 0 -- Dont show name or RSSI value
P1: 1 -- Show name
P1: 2 -- Show RSSI value
P1: 3 -- Show name and RSSI value
RSSI value total length is 14 Bytes.
RSSI value format "OK+RSSI:<P1>\r\n"
<P1>: 4 Bytes RSSI value
HMSoft
| | 技术支持: webmaster@jnhuamao.cn |
|
