 当前位置：阅读信息 |
HM-10_11 firmware V545 released | 
|
HM-10/11 CC2540/1
V545
=======================================================================
Add AT+FFE2 command used to add a new Characteristic
Add AT+FFE2<P1> command used to add a new Characteristic.
P1: ? ----- Query
P1: 0 ----- Close FFE2 Characteristic, Default value.
P1: 1 ----- Open FFE2 Characteristic
if AT+FFE20 is setup
Service and Characteristic list as follow:
Service FFE0
Characteristic FFE1 (if AT+RESP0 was setup, Properties is Read, WriteWithoutResponse, Notify)
Characteristic FFE1 (if AT+RESP1 was setup, Properties is Read, Write, Notify)
if AT+FFE21 is setup
Service and Characteristic list as follow:
Service FFE0
Characteristic FFE1 (Properties is Read, Notify)
Characteristic FFE2 (if AT+RESP0 was setup, Properties is WriteWithoutResponse)
Characteristic FFE2 (if AT+RESP1 was setup, Properties is Write)
HMSoft
2016.12
| | 技术支持: webmaster@jnhuamao.cn |
|
